The working process of the tablet press can be divided into the following steps:
1. The punch part of the lower punch (its working position is upward) extends from the lower end of the middle die hole into the middle die hole to seal the bottom of the middle die hole;
2. Use the feeder to fill the middle die hole with medicine;
3. The punch part of the upper punch (its working position is downward) falls into the middle die hole from the upper end of the middle die hole, and goes down for a certain stroke to press the powder into tablets;
4. The upper punch lifts the exit hole. The lower punch rises to push the tablet out of the middle die hole to complete a tableting process;
5. Lower the flush down to its original position, ready for the next filling.
